TOOLS & PLANTS

“Safety of our members is our prime importance as it finally becomes the statement of our quality & proficiency”

 

Table saw TS 161/21

Description

  • Accuracy is achieved by cutting from below for 90° saw cuts and angled cuts
  • Wide pivoting range of up to 45° to the left and 0° to the right
  • The special pivoting mechanism with integrated turn table enables working from the front at any angle setting
  • The back fence is adjustable to allow optimal use of the saw blade capacity for wide and flat profiles
  • Manual saw feed
  • Equipped with saw blade and machine base as standard
  • Pneumatic material clamping (vertical)
  • Pulsed coolant system
  • Maintenance unit

Technical specifications

  • For cutting range, see cutting diagram
  • Saw blade diameter 280 mm
  • Saw blade speed 3,200 rpm
  • Power supply 230/400 V, 3~, 50 Hz
  • Power output 1.05 kW
  • Length 650 mm, depth 750 mm, height 1,300 mm, weight 130 kg

Options

  • Digital display for pivoting angles
  • Extraction system
  • Length stop and measuring systems
  • Roller conveyors
  • High performance cutting fluid
  • Manual safety hood
Double mitre saw DG 244

Description

The reliable elumatec principle “Cutting from below”:

  • Provides unhindered access to support table
  • A large saw blade diameter and optimal use of the saw blade offer an ideal cutting capacity for all cutting variations
  • Standard for elumatec: External dimension cuts at all angle positions. This means no length calculations are necessary when cutting profiles of different heights
  • The universal pivoting and tilting of both saw units allows cutting of high and wide profiles as well as every type of compound mitre. Consequently, many profiles can be cut without support blocks
  • External-dimension cuts possible for all cutting variations. Consequently, no complicated length calculations are necessary. This is a big advantage when cutting special angles
  • Safety hoods
  • Equipped with saw blades as standard
  • Pulsed coolant system

Technical specifications

  • Minimum cutting length at 90° 375 mm
  • Minimum cutting length tilted at 45° 375 mm
  • Pivoting range inwards, pneumatically, 90° – 45°(manually up to 22.5° inwards and up to 140° outwards with digital display)
  • Tilting range inwards, pneumatically, 90° – 45°(intermediate angles manually adjustable with digital read-out display and turret stop)
  • For cutting range, see cutting diagram
  • Saw blade diameter 550 mm
  • Saw blade speed 2,250 rpm
  • Power supply 230/400 V, 3~, 50 Hz
  • Power output per motor 4 kW
  • Compressed air supply 7 bar
  • Air consumption per working cycle 40 l without spraying, 64 l with spraying

Cutting length variants

  • 4,500 mm
  • 6,000 mm
  • 7,500 mm

Options

  • DG 244 M machine bed made of steel sheet
  • Hydro-pneumatic saw feed
  • Saw feed – minimum cutting length 400 mm
  • Profile lifting bars
  • Additional software for E 580: Optimisation program,Software module for chop and oversize length cuts
  • Mobile or automatically retractable workpiece supports
  • Material clamping units
  • Transom stop and lead-cut stop
  • Label printer for variants with E 355 and E 580
  • Exhaust connectors, extraction system
  • Clock system
  • Roller conveyor
  • Saw blades
  • High performance cutting fluid
Notching saw AKS 134/00

Description

  • Variable notching possibilities for mullion and transom combinations,e.g. for curtain walls, conservatories, sky lights, and special designs
  • Precise and safe notching is ensured because the workpiece is fixed and only the saw units move
  • Both saw units are adjusted in height simultaneously by means of a hand wheel (analogue display on the hand wheel)
  • The cutting depth is set using an analogue display
  • Manual angle adjustment of the saw blades using a digital display of the tilting angles
  • Support table with compound slide and pivoting back fence is manually adjustable for optimal use of the cutting range
  • The angle of the pivoting back fence is shown on a digital display
  • Horizontal and vertical profile clamping
  • Automatic working cycle at a 90° pivoting angle (two-hand control when cutting special angles)
  • Hydro-pneumatic saw feed

Technical specifications

Lower saw unit (vertical):

  • Saw blade diameter 550 mm
  • Tilting range from 45° forwards to 60° towards the rear
  • Max. cutting height of 210 mm
  • Power supply 230/400 V, 3~, 50 Hz
  • Power output 3 kW with motor brake
  • Saw blade speed 2,800 rpm
  • Manual tilting angle adjustment with digital display (standard)

Upper saw unit (horizontal):

  • Saw blade diameter 500 mm
  • Tilting range from 55° downwards up to 60° upwards
  • Notching depth, max. 190 mm
  • Power supply 230/400 V, 3~, 50 Hz
  • Power output 3 kW with motor brake
  • Saw blade speed 2,800 rpm
  • Manual tilting angle adjustment with digital display (standard)
  • Travel 830 mm max.

Support table with working height of 990 mm:

  • Pivoting range from 30° left to 30° right, home position 0°
  • Pivoting range manual with digital display
  • Compressed air supply 7 bar
  • Air consumption per working cycle 35 l without spraying, 45 l with spraying
  • Length 3,000 mm, depth 1,420 mm, height 1,600 mm, weight 1,250 kg

NOTCHING SAW AKS 134/10

See AKS 134/00, however:

  • Equipped with a 4-axis controller for automatic adjustment of the horizontal and vertical saw blades for angle cutting, as well as for height adjustment and notching depth
  • Values from design drawings can be entered directly via the keyboard

Options

  • Laser indicator for cutting line
  • Noise protection package
  • Saw blades
  • High performance cutting fluid
End milling machine AF 221/01

Description

  • For routing transoms and door profiles made of aluminium or PVC
  • Large cutting range of up to 250 mm
  • Manual feed of the routing unit
  • Tool diameters of up to 250 mm can be used
  • The material stop can be pivoted up to 45° to the left and right
  • With quick tool change system and “Spindle Lock” for easy tool changing
  • Precise, smooth-action and low-wear recirculating ball guides
  • Horizontal and vertical pneumatic material clamping provides flexibility
  • Depth stop for four different notching depths
  • Integrated connecting piece with extractor hose for connection to an extraction system
  • Pulsed coolant system

Technical specifications

  • Cutting tool diameter 250 mm max.
  • Cutter bore 40 mm
  • Cutting height 115 mm
  • Cutting depth 95 mm
  • Cutting length 250 mm
  • Spindle speed 2,800 rpm
  • Travel 350 mm
  • Power supply 230/400 V, 3~, 50 Hz
  • Compressed air supply 7 bar
  • Power output 2 kW
  • Air consumption per working cycle 10 l without spraying, 20 l with spraying
  • Length 800 mm, depth 800 mm, height 1,000 mm, weight 100 kg

Options

  • Spacers
  • Extraction system
  • Maintenance unit
  • Router
  • High performance cutting fluid
spindle copy router AS 70/44

Description

  • Versatile for many applications in aluminium profile machining
  • Precision routing with a minimum of effort and easy, two-lever operation
  • Copy routing at a ratio of 1:1 transfers the cutting pattern from a template to the profile
  • Your own custom templates can be created(by copying the template to a blank)
  • Copy routing using stops is also possible (only rectangular cutting patterns)
  • Can be set up in only a few steps
  • Pneumatic material clamping unit
  • Manual tracer point with three levels for different cutter diameters

Technical specifications

  • Horizontal cutting range with stop 230 x 90 mm
  • Horizontal cutting range with copy template 230 x 90 mm
  • Spindle speed 12,000 rpm
  • Clamping range for profiles 180 x 130 mm
  • Travel 110 mm
  • Power supply 230/400 V, 3~, 50 Hz
  • Power output 0.74 kW
  • Compressed air supply 7 bar
  • Air consumption per working cycle 12 l without spraying, 24 l with spraying
  • Length 720 mm, depth 650 mm, height 1,440 mm, weight 120 kg

Options

  • Copy templates
  • Collets
  • Stands and guide bars
  • Workpiece supports and stops
  • Material clamping units
  • Cutting tools
  • High performance cutting fluid

1-SPINDLE COPY ROUTER AS 70/45

See AS 70/44, however:

  • Speed switching from 12,000 rpm to 6,000 rpm forcutting thin-walled steel profiles

1-SPINDLE COPY ROUTER AS 70/50

See AS 70/44, however:

  • Table-top unit
  • Manual material clamping unit

Length 720 mm, depth 650 mm, height 960 mm, weight 75 kg

Profile machining centre SBZ 1400 eluCam

Description

  • 4-axis profile machining centre
  • Designed for economical and efficient machining of aluminium and thin-walled steel profiles
  • All operations, such as routing, drilling and tapping are performed while the profile bar is stationary to protect the profile surfaces
  • Machining with all tools at angles continuously adjustable from 0° – 180°
  • The on-board tool magazine ensures that tool changing times are kept short, thereby optimising machining cycles
  • The magazine can be equipped with eight tools
  • A rotating angle head with two different tools is available fordouble-bar and end machining (0° – 90° – 180° – 270°) (option)
  • Two separate working zones enable machining in shuttle operation (option)
  • 4-axis controller
  • 15″ colour display, USB ports and network connection
  • Windows operating system
  • eluCam

Technical specifications

  • Traverse path X-axis, 4,200 mm, 6,400 mm, 7,600 mm, 9,700 mm (additional lengths on request) Vmax. 65 m/min.
  • Traverse path Y-axis, 850 mm, Vmax. 60 m/min.
  • Traverse path Z-axis, 650 mm, Vmax. 60 m/min.
  • Pivoting angle A-axis, 0° – 180°; freely programmable in 1/10° steps
  • Max. spindle speed 24,000 rpm
  • Spindle power output 8.5 kW
  • Tool changer for eight tools, additional tool positions on request
  • Compressed air supply 7 bar
  • Power supply 400 V, 3~, 50 Hz, 63 A
  • Air consumption per minute 180 l with spraying

Machining lengths
SBZ 140 – 4.2 m

  • Max. machining length with profile end machining, 4,080 mm
  • Max. machining length without profile end machining, 4,200 mm

SBZ 140 – 6.4 m

  • Max. machining length with profile end machining, 6,280 mm
  • Max. machining length without profile end machining, 6,400 mm

SBZ 140 – 7.6 m

  • Max. machining length with profile end machining, 7,480 mm
  • Max. machining length without profile end machining, 7,600 mm

SBZ 140 – 9.7 m

  • Max. machining length with profile end machining, 9,580 mm
  • Max. machining length without profile end machining, 9,700 mm

Optional

  • Automatic length measurement
  • Clamping unit accommodates double profile machining
  • Chips conveyor belt
  • Barcode scanner
  • Stationary tool magazine
  • Angle routing heads
  • Tool holders
  • Collet chucks
  • Collets
  • Tools
  • eluCad (office software package for optimized production management)
Corner crimper EP 120

Description

  • For pressing profiles with a height of up to 68 mm
  • Extremely high pressing force due to large-volume bellows cylinder (maintenance free)
  • The machine is easy to adjust and operate
  • Counter bearing can be positioned pneumatically, mechanical locking
  • Support arms and pressing blades included as standard

Technical specifications

  • Pressing height 68 mm
  • Pressing force 40 kN (4 t)
  • Pneumatic drive
  • Compressed air supply 7 bar
  • Air consumption per working cycle 30 l
  • Length 650 mm, depth 820 mm, height 1,270 mm, weight 205 kg

Options

  • Additional support
  • Special pressing blade

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>